Milling drums from MD series, with the patented X-shaped structure, have been designed for large-scale production.

MD 210 PRO

drum size 2500 x 1100 mm / recommended capacity 300 Kg

MD 215 PRO

drum size 2500 x 1600 mm / recommended capacity 400 Kg

MD 315 PRO

drum size 3000 x 1600 mm / recommended capacity 600 Kg

MD 320 PRO

drum size 3000 x 2000 mm / recommended capacity 800 Kg

Milling drums from MD series, with the patented X-shaped structure, have been designed for large-scale production.

MD 210 PRO

drum size 2500 x 1100 mm / recommended capacity 300 Kg

MD 215 PRO

drum size 2500 x 1600 mm / recommended capacity 400 Kg

MD 315 PRO

drum size 3000 x 1600 mm / recommended capacity 600 Kg

MD 320 PRO

drum size 3000 x 2000 mm / recommended capacity 800 Kg

Passion and Precision

The drums of the MD Series are the exemplary combination of these 2 words. With the patented X-shaped structure, this new drum has been designed for large-scale production. Entirely made of stainless steel, it ensures load stability and limited vibrations when starting and stopping. Entirely insulated, it guarantees durability over time and reduced energy consumption.

Monetary savings is one of Revomec’s strengths, respecting the environment as much as possible, offering machinery totally “Made in Italy”.

Compact size and innovative heating management system. Dust extractor enhanced with the exclusive filter unit with direct injection (no dust and oxidation).

The careful design and high quality components facilitate the control and maintenance of the system. The same attention was also paid to the preparation of the protection systems (according to EU standards).

Technical Specifications

	MD 210	MD 215	MD 315	MD 320
Installed power	18 – 34 Kw (400V/50Hz)	18 – 34 Kw (400V/50Hz)	22 – 37,5 Kw (400V/50Hz)	22 – 37,5 Kw (400V/50Hz)
Compressed air	5 Bar (20 – 100 l/h)*	5 Bar (20 – 100 l/h)*	5 Bar (20 – 100 l/h)*	5 Bar (20 – 100 l/h)*
Water line	2,5 Bar (1 – 5 l/min)*	2,5 Bar (1 – 5 l/min)*	2,5 Bar (1 – 5 l/min)*	2,5 Bar (1 – 5 l/min)*
Drum size	2500 x 1100 mm	2500 x 1500 mm	3000 x 1600 mm	3000 x 2000 mm
Max. width (A)	2900 mm	2900 mm	3300 mm	3300 mm
Max. depth (B)	3000 mm	3000 mm	3510 mm	3510 mm
Max. height (C)	2700 mm	2700 mm	3200 mm	3200 mm
Door width	600 mm	880 mm	880 mm	1200 mm
				* Indicative values and estimated on standard processing

The Revomec Drums can be equipped with various optionals.

Discover the options available

T +39 0445 491384 – F +39 0445 1889583 – mail revomec@revomec.com

REVOMEC SRL Via delle Tezze, 37 – Trissino (Vicenza) – Italy
P.IVA / C.F. 03686860242

national association manufacturers of tanning technologies

REVOMEC SRL Via delle Tezze, 37 – Trissino (Vicenza) – Italy
P.IVA / C.F. 03686860242

T +39 0445 491384 – F +39 0445 1889583 – mail revomec@revomec.com

national association manufacturers of tanning technologies